Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

PARKER HANNIFIN

Parker P31 series 5 μm 1/4 in 250 psi Pneumatic Filter 25 SCFM max with Manual drain

Parker P31 series 5 μm 1/4 in 250 psi Pneumatic Filter 25 Scfm max with Manual drain - Pressure Rating: 250 psi; Filtration Size: 5 μm; Flow Rate: 25 SCFM; Port / Thread Size: 1/4 in.

Parker P31 series 5 μm 1/4 in 250 psi Pneumatic Filter 25 SCFM max with Manual drain
IN STOCK
Image is for illustrative purposes only. Please refer to product description.
Manufacturer
PARKER HANNIFIN
Order Code
PARKER-BXVBHJ
Category
Pumps & Fluid Handling
Your Part Number

Key Specifications

Pressure Rating

250 psi

Filtration Size

5 μm

Flow Rate

25 SCFM

Port / Thread Size

1/4 in

Available
Fast Response — Quote within 24 hours

Send inquiry before 6pm

Worldwide Shipping

Ex-works or delivered on request

Accurate pricing calculated during the quote process.
Quantity
Price
1+
On Request
Price for: Each
Open Full RFQ Form
Worldwide delivery available

Product Description

The Parker P31 series 5 μm 1/4 in 250 psi Pneumatic Filter 25 Scfm max with Manual drain removes particulate/moisture from a compressed air line. Per the catalog listing, it is specified as: Pressure Rating: 250 psi; Filtration Size: 5 μm; Flow Rate: 25 SCFM; Port / Thread Size: 1/4 in.

Supplied by Z&F Corporation as part of the Parker Hannifin range - confirm the exact ordering code, lead time, and compatibility with your existing installation with our technical sales team when requesting a quote.

Key Features

Pressure Rating: 250 psi

Filtration Size: 5 μm

Flow Rate: 25 SCFM

Port / Thread Size: 1/4 in

Technical Specifications

Pressure Rating250 psi
Filtration Size5 μm
Flow Rate25 SCFM
Port / Thread Size1/4 in

Frequently Asked Questions

Usually yes — shaft diameter and seat thickness, or a photo of the old seal next to a ruler, are normally enough to identify the correct seal or a genuine direct equivalent.

Genuine Supply

100% Authentic Parts

Full Traceability

Chain of Custody

ISO 9001 Team

Certified Professionals

Global Shipping

Worldwide Delivery

24-Hour Response

Fast Quotes

HomeCategoriesRFQContact