Automation

Product Category

Automation

1011 Products Found

Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

Genuine OEM Guaranteed
No grey-market or counterfeit stock
Fast & Reliable Delivery
24-48hr dispatch on available items
Complete Documentation
Certificates & calibration records
Full Catalogue

All Automation Products

Showing 24 of 1011 products

Norgren AA260 - DISCONTINUED BY MANUFACTURER, SENSOR, FERROUS TYPE, 7 PIN
NORGREN

Norgren AA260 - DISCONTINUED BY MANUFACTURER, SENSOR, FERROUS TYPE, 7 PIN

View Details
Norgren ALTAIR 4XR - GAS DETECTOR, 4 GAS MONITOR
NORGREN

Norgren ALTAIR 4XR - GAS DETECTOR, 4 GAS MONITOR

View Details
Norgren A1255A1 - DISCONTINUED BY MANUFACTURER, PNEUMATIC CYLINDER, 250 PSI, 200 DEG FAR
NORGREN

Norgren A1255A1 - DISCONTINUED BY MANUFACTURER, PNEUMATIC CYLINDER, 250 PSI, 200 DEG FAR

View Details
Norgren A1277A2 - DISCONTINUED BY MANUFACTURER, CYLINDER AIR, 2INCH BORE, 12INCH STROKE, 250 MAX PSI
NORGREN

Norgren A1277A2 - DISCONTINUED BY MANUFACTURER, CYLINDER AIR, 2INCH BORE, 12INCH STROKE, 250 MAX PSI

View Details
Norgren A1012B-A1 - VALVE, PROSPECTOR, POPPET, 2/2, NC, AIR/SPR RTN, 1/4 INCH NPT
NORGREN

Norgren A1012B-A1 - VALVE, PROSPECTOR, POPPET, 2/2, NC, AIR/SPR RTN, 1/4 INCH NPT

View Details
Norgren A1015H-CC - DISCONTINUED BY MANUFACTURER, POPPET VALVE, 2-PORT/2-POSITION, NORMALLY CLOSED, 150PSIG, 3/4IN PORT
NORGREN

Norgren A1015H-CC - DISCONTINUED BY MANUFACTURER, POPPET VALVE, 2-PORT/2-POSITION, NORMALLY CLOSED, 150PSIG, 3/4IN PORT

View Details
Norgren A1233A1 - DISCONTINUED BY MANUFACTURER, HYDRAULIC CYLINDER, A SERIES, 2" BORE, 8" STROKE, 250 PSI MAX, TMAX 200 F, NO CUSHIONS, MA
NORGREN

Norgren A1233A1 - DISCONTINUED BY MANUFACTURER, HYDRAULIC CYLINDER, A SERIES, 2" BORE, 8" STROKE, 250 PSI MAX, TMAX 200 F, NO CUSHIONS, MA

View Details
Norgren A0337C3-5.00X24.00 - PNEUMATIC CYLINDER, ALUMINUM, 5 INCH BORE, 24 INCH STROKE, HEAD RETANGULAR FLANGE MOUNT, FEMALE PISTON ROD
NORGREN

Norgren A0337C3-5.00X24.00 - PNEUMATIC CYLINDER, ALUMINUM, 5 INCH BORE, 24 INCH STROKE, HEAD RETANGULAR FLANGE MOUNT, FEMALE PISTON ROD

View Details
Norgren A0177A1-2.00X5.00 - DISCONTINUED BY MANUFACTURER, CYLINDER, PNEUMATIC, 250PSI, 200DEG FARENHEIGHT
NORGREN

Norgren A0177A1-2.00X5.00 - DISCONTINUED BY MANUFACTURER, CYLINDER, PNEUMATIC, 250PSI, 200DEG FARENHEIGHT

View Details
Norgren A0337A2-1.5X6 - CYLINDER, PNEUMATIC, 1 1/2 INCH BORE, 6 INCH STROKE, 250 MAX PSI, 200F DEGREE TMAX, ALUMINUM, RECTANGULAR FLANGE HEAD, A
NORGREN

Norgren A0337A2-1.5X6 - CYLINDER, PNEUMATIC, 1 1/2 INCH BORE, 6 INCH STROKE, 250 MAX PSI, 200F DEGREE TMAX, ALUMINUM, RECTANGULAR FLANGE HEAD, A

View Details
Norgren A-ULTX-SENS-33-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, LEL SOLVENTS, 316 STAINLESS STEEL, FINE THREADS
NORGREN

Norgren A-ULTX-SENS-33-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, LEL SOLVENTS, 316 STAINLESS STEEL, FINE THREADS

View Details
Norgren A-ULTX-SENS-38-2-0 - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, METHANE, STAINLESS STEEL
NORGREN

Norgren A-ULTX-SENS-38-2-0 - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, METHANE, STAINLESS STEEL

View Details
Norgren A-ULTX-SENS-39-10-C - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, PROPANE, STAINLESS STEEL
NORGREN

Norgren A-ULTX-SENS-39-10-C - GAS SENSOR, ULTIMA X SERIES, 0-100 PERCENT, PROPANE, STAINLESS STEEL

View Details
Norgren A-ULTX-SENS-14-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-25 PERCENT OXYGEN, GENERAL PURPOSE, FINE THREADED
NORGREN

Norgren A-ULTX-SENS-14-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-25 PERCENT OXYGEN, GENERAL PURPOSE, FINE THREADED

View Details
Norgren A-ULTX-SENS-16-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-50 PPM HYDROGEN SULFIDE, STAINLESS STEEL
NORGREN

Norgren A-ULTX-SENS-16-1-0 - GAS SENSOR, ULTIMA X SERIES, 0-50 PPM HYDROGEN SULFIDE, STAINLESS STEEL

View Details
Norgren A-ULTIMAX-PL-A-00-0-3-S-2-0-0-1-0-1-0-0 - DISCONTINUED BY MANUFACTURER, GAS MONITOR, ULTIMAX SERIES, EXPROSION PROOF, SENSOR MOUNTED ON CONTROL UNIT
NORGREN

Norgren A-ULTIMAX-PL-A-00-0-3-S-2-0-0-1-0-1-0-0 - DISCONTINUED BY MANUFACTURER, GAS MONITOR, ULTIMAX SERIES, EXPROSION PROOF, SENSOR MOUNTED ON CONTROL UNIT

View Details
Norgren A-ULTX-SENS-14-0-0 - GAS SENSOR, ULTIMA X SERIES, OXYGEN GAS TYPE, 0-25% OXYGEN, PLASTIC ENCLOSURE ,GENERAL PURPOSE
NORGREN

Norgren A-ULTX-SENS-14-0-0 - GAS SENSOR, ULTIMA X SERIES, OXYGEN GAS TYPE, 0-25% OXYGEN, PLASTIC ENCLOSURE ,GENERAL PURPOSE

View Details
Norgren A-5K-SENS-AF-0-F-1-0 - SENSOR, 5000 SERIES, 1 3/4 INCH NPT, AF CARBON DIOXIDE IR 2 PERCENT, STAINLESS STEEL
NORGREN

Norgren A-5K-SENS-AF-0-F-1-0 - SENSOR, 5000 SERIES, 1 3/4 INCH NPT, AF CARBON DIOXIDE IR 2 PERCENT, STAINLESS STEEL

View Details
Norgren A-GASGARDXL-5-2-1-0 - CONTROLLER, GASGARD XL, 8 SENSOR
NORGREN

Norgren A-GASGARDXL-5-2-1-0 - CONTROLLER, GASGARD XL, 8 SENSOR

View Details
Norgren A-NGHN251121000002 - HARNESS PULLOVER X-SMALL RED
NORGREN

Norgren A-NGHN251121000002 - HARNESS PULLOVER X-SMALL RED

View Details
Norgren 8216654.0000 - DISCONTINUED BY MANUFACTURER, VALVE FOR SOLENOID, 2 WAY, BRASS, 1 3/4 IN, 16 BAR
NORGREN

Norgren 8216654.0000 - DISCONTINUED BY MANUFACTURER, VALVE FOR SOLENOID, 2 WAY, BRASS, 1 3/4 IN, 16 BAR

View Details
Norgren 8493949.8001 - SOLENOID VALVE, BRASS VALVE BODY, 24VDC COIL RATING, 12W POWER RATING, 0.5-10 PA
NORGREN

Norgren 8493949.8001 - SOLENOID VALVE, BRASS VALVE BODY, 24VDC COIL RATING, 12W POWER RATING, 0.5-10 PA

View Details
Norgren 8494093.9651 - DISCONTINUED BY MANUFACTURER, VALVE, 24V, 00HZ, 2,5WTT, 2 BAR
NORGREN

Norgren 8494093.9651 - DISCONTINUED BY MANUFACTURER, VALVE, 24V, 00HZ, 2,5WTT, 2 BAR

View Details
Norgren 8499718.9169.02400 - SOLENOID VALVE, 24 VDC, 2 W, 0.1 TO 10 BAR, 2/2-WAY
NORGREN

Norgren 8499718.9169.02400 - SOLENOID VALVE, 24 VDC, 2 W, 0.1 TO 10 BAR, 2/2-WAY

View Details
About This Category

Automation at Z & F Corporation Ltd

Automation

These are the components an operator actually touches — push buttons, selector switches, pilot lights and E-stops — plus the timer relays and control accessories behind the panel that make them do something. Z & F Corporation Ltd supplies genuine automation and panel control components for machine builders, panel shops and maintenance teams, sourced through manufacturer and authorised distributor channels with full documentation on request.

  • 🔘 Push Buttons & Selector Switches — momentary and maintained, with 1–4 contact blocks depending on the control logic.
  • 💡 Pilot Lights — LED indicators in standard colours, AC or DC, for panel and machine status.
  • 🛑 Emergency Stop Buttons — twist-release and pull-release, normally-closed contacts for safety circuits.
  • ⏱️ Timer & Control Relays — DIN rail mounted, for delay, interlock and sequencing logic.

Most of these parts share the same 22 mm panel cutout, so fitting a replacement is usually straightforward — the details that actually matter are the contact configuration (how many NO/NC contacts, and whether it's momentary or maintained) and the ingress protection rating if the panel is exposed to washdown or outdoor conditions (IP66/IP67/IP69K are common for that duty).

Pro tip — Emergency stop buttons should use normally-closed contacts with a positive break (direct opening) action, not normally-open — that way a broken wire or loose connector fails safe by stopping the machine, not by silently disabling the E-stop.

These are the automation components we quote most often, and our sourcing network covers projects worldwide, including the Gulf and South Asia. Send us a part number or panel drawing and request a quote — we'll confirm fit, lead time and documentation.

Need Automation Products?

Send us your part number, model number or specification and we will source genuine Automation products with full documentation and fast delivery.

Request a Quote

Frequently Asked Questions

Panel cutouts are commonly standardised at 22 mm, but contact blocks, mounting and wiring can differ between manufacturers — send us the existing part or a photo and we'll confirm compatibility.