Industrial Valves

Product Category

Industrial Valves

613 Products Found

Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

Genuine OEM Guaranteed
No grey-market or counterfeit stock
Fast & Reliable Delivery
24-48hr dispatch on available items
Complete Documentation
Certificates & calibration records
Full Catalogue

All Industrial Valves Products

Showing 24 of 613 products

FLOWSERVE

CLASS 300 BLOW-OFF ANGLE VALVE, FLANGED ENDS, 2.00"

View Details
FLOWSERVE

VALVE,1 INCH

View Details
DURCO 1IN LINED PLUG VALVES W/WRENCH
FLOWSERVE

DURCO 1IN LINED PLUG VALVES W/WRENCH

View Details
DURCO BALL VALVE 1-1/2IN BR21FRLGZ666D * MICROFINISH SS
FLOWSERVE

DURCO BALL VALVE 1-1/2IN BR21FRLGZ666D * MICROFINISH SS

View Details
CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 3.00"
FLOWSERVE

CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 3.00"

View Details
CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 12.00"
FLOWSERVE

CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 12.00"

View Details
ANGLE BLOW-OFF VALVES, MATERIAL A105, FLANGED ENDS, 2 1/2", CLASS 300
FLOWSERVE

ANGLE BLOW-OFF VALVES, MATERIAL A105, FLANGED ENDS, 2 1/2", CLASS 300

View Details
BALL VALVE 3INCH W/PNEUMATIC ACTUATOR
FLOWSERVE

BALL VALVE 3INCH W/PNEUMATIC ACTUATOR

View Details
VALVE
FLOWSERVE

VALVE

View Details
3-PIECE HYDRO-MIZER BALL VALVE 1-1/2IN
FLOWSERVE

3-PIECE HYDRO-MIZER BALL VALVE 1-1/2IN

View Details
CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 4.00"
FLOWSERVE

CLASS 900 CHECK VALVES - PRESSURE SEAL BONNET, ANGLE, FLANGED ENDS, 4.00"

View Details
VALVE 3-WAY 1IN BRASS 316SS BALL TFE SEALS
FLOWSERVE

VALVE 3-WAY 1IN BRASS 316SS BALL TFE SEALS

View Details
BALL VALVE 2INCH 316MAX
FLOWSERVE

BALL VALVE 2INCH 316MAX

View Details
DISCONTINUED BY MANUFACTURER, BALL VALVE REDUCED 3/PIECE 400 DEG F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, BALL VALVE REDUCED 3/PIECE 400 DEG F

View Details
ELECTRIC VALVE ACTUATOR SERIES 75 150 IN-LB
FLOWSERVE

ELECTRIC VALVE ACTUATOR SERIES 75 150 IN-LB

View Details
BALE VALVE 2IN SW SS 3 PC
FLOWSERVE

BALE VALVE 2IN SW SS 3 PC

View Details
ELECTRIC VALVE ACTUATOR SERIES 75 900 IN-LB
FLOWSERVE

ELECTRIC VALVE ACTUATOR SERIES 75 900 IN-LB

View Details
BALL VALVE 1/2INCH TFE SCREW ENDS W/LEVER
FLOWSERVE

BALL VALVE 1/2INCH TFE SCREW ENDS W/LEVER

View Details
CONTROL VALVE, 1/4 INCH CONNECTION, 2 POSITION
FLOWSERVE

CONTROL VALVE, 1/4 INCH CONNECTION, 2 POSITION

View Details
DISCONTINUED BY MANUFACTURER, VALVE, BALL VALVE, THREE PIECE, 1/2 INCH, 400F MAX TEMP, TFE SEAT, STAINLESS STEEL BODY AND TRIM
FLOWSERVE

DISCONTINUED BY MANUFACTURER, VALVE, BALL VALVE, THREE PIECE, 1/2 INCH, 400F MAX TEMP, TFE SEAT, STAINLESS STEEL BODY AND TRIM

View Details
DISCONTINUED BY MANUFACTURER, GLOBE VALVE, UNIVALVE, 1-1/2INCH, CLASS 1690, 4225CWP, 2895PSI, 800 DEGREE F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, GLOBE VALVE, UNIVALVE, 1-1/2INCH, CLASS 1690, 4225CWP, 2895PSI, 800 DEGREE F

View Details
PNEUMATIC VALVE, 3 WAY PORT, 120 VOLTA AC
FLOWSERVE

PNEUMATIC VALVE, 3 WAY PORT, 120 VOLTA AC

View Details
DISCONTINUED BY MANUFACTURER, BALL VALVE, 1/2 INCH, 3 PIECE BOLTED BODY, CARBON STEEL, BODY ; A105, STEM ; S6, BALL ; S6, SEAT ; UHPE, CWP ; 3000 AT 100F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, BALL VALVE, 1/2 INCH, 3 PIECE BOLTED BODY, CARBON STEEL, BODY ; A105, STEM ; S6, BALL ; S6, SEAT ; UHPE, CWP ; 3000 AT 100F

View Details
BALL VALVE, 44 SERIES, 1 INCH, LOCKING HANDLE, EXTENDED BUTT WELD, QUICK DISCONNECT, EXTENDED LEVER HANDLE, CMTRS, REINFORCED TFE, 316 STAINLESS STEEL
FLOWSERVE

BALL VALVE, 44 SERIES, 1 INCH, LOCKING HANDLE, EXTENDED BUTT WELD, QUICK DISCONNECT, EXTENDED LEVER HANDLE, CMTRS, REINFORCED TFE, 316 STAINLESS STEEL

View Details
About This Category

Industrial Valves at Z & F Corporation Ltd

Industrial Valves

Not every product under this heading is a process valve controlling flow in a pipeline — a good share of what we hold here are pneumatic directional control valves (spool and poppet valves) that route compressed air inside an automation circuit rather than liquid or gas through a process line. Both end up filed as "valves," but they're specified completely differently. Z & F Corporation Ltd supplies 584 genuine lines across both types, from 22 manufacturers.

The Two Main Groups

  • Process valves — ball, globe, and control valves, specified by body material, end connection, size, and Cv, used to control flow of a process fluid.
  • Pneumatic control valves — solenoid-piloted spool and poppet valves (3/2, 5/2 configurations), specified by port size, voltage, and base/manifold interface, used inside automation and actuation circuits.

If you're not sure which one you need, the giveaway is usually what's on the other side of it: a process valve sits in a pipe carrying the product itself; a pneumatic control valve sits in an air line feeding an actuator or cylinder somewhere else in the system. This range sits under the wider Valves & Controls category — see also Actuators & Positioners for what these valves are often paired with.

Who We Supply

Rotork and Flowserve lead on process valves and actuation; Norgren and Parker Hannifin lead on pneumatic control valves; Johnson Controls, Emerson (Aventics, Fisher), and Danfoss fill in more specific requirements across both groups. We are not affiliated with, or an authorised distributor of, any of these manufacturers — genuine stock only, sourced and supplied independently.

Matching a Pneumatic Control Valve

For spool and poppet valves specifically, the base/manifold interface (e.g. F base, ISO 5599) and voltage matter as much as the valve function itself — two valves with an identical 5/2 spec won't necessarily bolt onto the same manifold. Send us the base interface if you have it, or a photo of the valve on its manifold.

Orders ship worldwide with export documentation as standard — recent shipments have gone to process plants and automation OEMs across the GCC and South Asia. If you're replacing rather than specifying new, the nameplate details — series, port size, pilot voltage, and pressure rating — are usually enough for us to confirm the exact valve or a genuine direct equivalent, even where the original has been discontinued.

Need Industrial Valves Products?

Send us your part number, model number or specification and we will source genuine Industrial Valves products with full documentation and fast delivery.

Request a Quote

Frequently Asked Questions

A process valve sits directly in a pipe carrying the process fluid; a pneumatic control valve sits in an air line feeding an actuator elsewhere in the system. Describe where it's installed and we can confirm which type you need.