Valves & Controls

Product Category

Valves & Controls

881 Products Found

Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

Genuine OEM Guaranteed
No grey-market or counterfeit stock
Fast & Reliable Delivery
24-48hr dispatch on available items
Complete Documentation
Certificates & calibration records
Full Catalogue

All Valves & Controls Products

Showing 24 of 881 products

DISCONTINUED BY MANUFACTURER, OIL SEAL, 3/4IN VALVE, CARBON STEEL BODY, HASTELLOY BALL/STEM, TFE SEAT, 7X8.25X.625IN
FLOWSERVE

DISCONTINUED BY MANUFACTURER, OIL SEAL, 3/4IN VALVE, CARBON STEEL BODY, HASTELLOY BALL/STEM, TFE SEAT, 7X8.25X.625IN

View Details
FLUID POWER ACTUATOR, SUPERNOVA SERIES, 5005 NM OUTPUT TORQUE
FLOWSERVE

FLUID POWER ACTUATOR, SUPERNOVA SERIES, 5005 NM OUTPUT TORQUE

View Details
DISCONTINUED BY MANUFACTURER, PNEUMATIC VALVE, 3 INCH FLANGED, POLYFILL SEAT, 316 TRIM, 500 F MAX TEMPERATURE, 285 CWP
FLOWSERVE

DISCONTINUED BY MANUFACTURER, PNEUMATIC VALVE, 3 INCH FLANGED, POLYFILL SEAT, 316 TRIM, 500 F MAX TEMPERATURE, 285 CWP

View Details
DISCONTINUED BY MANUFACTURER, BALL VALVE, CLASS 800, 1920PSIG, 100F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, BALL VALVE, CLASS 800, 1920PSIG, 100F

View Details
PRESSURE REDUCING VALVE DN 15 PN69
FLOWSERVE

PRESSURE REDUCING VALVE DN 15 PN69

View Details
PMV LINKAGE KIT TO C FAMILY ACTUATORS
FLOWSERVE

PMV LINKAGE KIT TO C FAMILY ACTUATORS

View Details
BALL VALVE, STEEL, 1/2 " NPT
FLOWSERVE

BALL VALVE, STEEL, 1/2 " NPT

View Details
DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR, SIZE 25, NO SOLENOID, 80 PSI OUTPUT TORQUE, 120 PSI OPERATING, DOUBLE ACTING
FLOWSERVE

DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR, SIZE 25, NO SOLENOID, 80 PSI OUTPUT TORQUE, 120 PSI OPERATING, DOUBLE ACTING

View Details
DISCONTINUED BY MANUFACTURER, SPOOL VALVE, APEX 5000/6000, LOW FLOW
FLOWSERVE

DISCONTINUED BY MANUFACTURER, SPOOL VALVE, APEX 5000/6000, LOW FLOW

View Details
DISCONTINUED BY MANUFACTURER, BALL VALVE, 2 WAY BALL VALVE, STAINLES STEE BODY AND TRIM, CWP 1440, SEAT RTFE, TEMPERATURE MAX 450 F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, BALL VALVE, 2 WAY BALL VALVE, STAINLES STEE BODY AND TRIM, CWP 1440, SEAT RTFE, TEMPERATURE MAX 450 F

View Details
SOLENOID VALVE, OUTPUT: 80 PSI, MAX OPERATING PRESSURE: 120 PSI, .5AMP AT 125VDC, 125/250VAC, 15.1AMP
FLOWSERVE

SOLENOID VALVE, OUTPUT: 80 PSI, MAX OPERATING PRESSURE: 120 PSI, .5AMP AT 125VDC, 125/250VAC, 15.1AMP

View Details
REPAIR KIT FOR PNEUMATIC ACTUATOR SIZE 10-50
FLOWSERVE

REPAIR KIT FOR PNEUMATIC ACTUATOR SIZE 10-50

View Details
DISCONTINUED BY MANUFACTURER, NON-RETURN VALVE, DN 50MM, C.STEEL, FOR INDUSTRIAL APPLICATIONS
FLOWSERVE

DISCONTINUED BY MANUFACTURER, NON-RETURN VALVE, DN 50MM, C.STEEL, FOR INDUSTRIAL APPLICATIONS

View Details
DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR
FLOWSERVE

DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR

View Details
VALVE REPAIR KIT, 25MM
FLOWSERVE

VALVE REPAIR KIT, 25MM

View Details
ELECTRIC ACTUATOR, SERIES 75, 120 VAC, SIZE 10, WITH HEATER/THERMOSTAT, 100% DUTY CYCLE
FLOWSERVE

ELECTRIC ACTUATOR, SERIES 75, 120 VAC, SIZE 10, WITH HEATER/THERMOSTAT, 100% DUTY CYCLE

View Details
DISCONTINUED BY MANUFACTURER, ELECTRO-PNEUMATIC POSITIONER, MODEL PM15E, SIGNAL RANGE: 4-20 MA, SUPPLY PRESSURE: 125 PSI MAX., RI: 260OHMS, MAX. TEMP.: 185°F
FLOWSERVE

DISCONTINUED BY MANUFACTURER, ELECTRO-PNEUMATIC POSITIONER, MODEL PM15E, SIGNAL RANGE: 4-20 MA, SUPPLY PRESSURE: 125 PSI MAX., RI: 260OHMS, MAX. TEMP.: 185°F

View Details
DISCONTINUED BY MANUFACTURER, PNEUMATIC POSITIONER, 30 VDC, 25 MA, 30-120 PSI
FLOWSERVE

DISCONTINUED BY MANUFACTURER, PNEUMATIC POSITIONER, 30 VDC, 25 MA, 30-120 PSI

View Details
DISCONTINUED BY MANUFACTURER, BALL VALVE, CF8M BODY, 316 TRIM, RTFE SEAT, 275 CWP, 1 1/2 INCH
FLOWSERVE

DISCONTINUED BY MANUFACTURER, BALL VALVE, CF8M BODY, 316 TRIM, RTFE SEAT, 275 CWP, 1 1/2 INCH

View Details
DISCONTINUED BY MANUFACTURER, ACTUATOR, PNEUMATIC, 80PSI, 95INCH LBS, 10AMP, 250VAC
FLOWSERVE

DISCONTINUED BY MANUFACTURER, ACTUATOR, PNEUMATIC, 80PSI, 95INCH LBS, 10AMP, 250VAC

View Details
DISCONTINUED BY MANUFACTURER, VALVE PLUG, FLOW CONTROL, MANUAL TURN OFF/ON
FLOWSERVE

DISCONTINUED BY MANUFACTURER, VALVE PLUG, FLOW CONTROL, MANUAL TURN OFF/ON

View Details
DISCONTINUED BY MANUFACTURER, CONTROL VALVE, 125/250/480 VAC, 20 A
FLOWSERVE

DISCONTINUED BY MANUFACTURER, CONTROL VALVE, 125/250/480 VAC, 20 A

View Details
DISCONTINUED BY MANUFACTURER, VALVE, BALL VALVE, FLANGED, 2 INCH, CAST CARBON STEEL, POLYFILL THRUSTBEARING, ONE PIECE BOTTOM ENTRY,
FLOWSERVE

DISCONTINUED BY MANUFACTURER, VALVE, BALL VALVE, FLANGED, 2 INCH, CAST CARBON STEEL, POLYFILL THRUSTBEARING, ONE PIECE BOTTOM ENTRY,

View Details
DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR, 120VAC, 60HZ, 0.25 AMP, WATERTIGHT
FLOWSERVE

DISCONTINUED BY MANUFACTURER, PNEUMATIC ACTUATOR, 120VAC, 60HZ, 0.25 AMP, WATERTIGHT

View Details
About This Category

Valves & Controls at Z & F Corporation Ltd

Valves & Controls

Somewhere on almost every process line there's a point where flow has to start, stop, throttle back, or divert — and it's a valve, an actuator, or a regulator doing the actual work, usually specified well after the pumps and instrumentation. Z & F Corporation Ltd supplies genuine valves, actuators, and regulators across 849 lines from 25 manufacturers, covering everything from a manual ball valve to a fully positioned control valve assembly.

This category is a hub over three more specific ranges — browse directly if you already know what you need:

  • Industrial Valves — ball, plug, gate, globe and control valves in a range of body materials and end connections.
  • Actuators & Positioners — pneumatic and electric actuators, rotary and linear, plus digital and pneumatic positioners.
  • Pressure Regulators — reducing and back-pressure regulators for gas and liquid service.

For the instrumentation that monitors what these are doing, see Instrumentation — this range covers the equipment that acts on the process rather than measures it.

Actuation itself splits fairly cleanly into a few families: simple on/off pneumatic or electric actuators for isolation duty, modulating actuators taking a 4-20mA or 3-15psi control signal for throttling service, and digital positioners that convert a control signal into precise valve travel with local feedback. Which one you need usually comes down to the control loop it sits in, not the valve itself.

Who We Supply

BrandKnown ForExplore
RotorkElectric and fluid-power valve actuationRotork range
NorgrenPneumatic actuators and fluid controlNorgren range
FlowserveControl valves for process dutyFlowserve range
Parker HannifinPush-in and compression fluid connectorsParker Hannifin range
Emerson (Fisher, ASCO, Aventics)Control valve trims, solenoid valves, pneumaticsFisher (Emerson) range

We supply genuine stock only and are not a manufacturer, distributor, or agent of any brand listed above — where a brand requires authorised-distributor disclosure, that's noted on the relevant product or brand page.

Obsolete Actuators & Superseded Valve Models

A lot of the valve and actuator enquiries we get are for models the manufacturer has since superseded or discontinued. We source through multiple channels and can often find remaining genuine stock or confirm a direct replacement, including for actuators still running on older plant.

Orders ship worldwide with export documentation as standard — recent shipments have gone to buyers across the GCC, East Africa, and South Asia, alongside our UK and European base. If you're specifying against a datasheet, send us the model number or the full spec and we'll confirm stock, pricing, and lead time.

Need Valves & Controls Products?

Send us your part number, model number or specification and we will source genuine Valves & Controls products with full documentation and fast delivery.

Request a Quote

Frequently Asked Questions

Yes — send us the nameplate details you can read (manufacturer, voltage or air supply, torque or thrust rating) and a photo if you have one, and we'll identify the correct actuator or a genuine equivalent.