Industrial Valves

Product Category

Industrial Valves

613 Products Found

Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

Genuine OEM Guaranteed
No grey-market or counterfeit stock
Fast & Reliable Delivery
24-48hr dispatch on available items
Complete Documentation
Certificates & calibration records
Full Catalogue

All Industrial Valves Products

Showing 24 of 613 products

FLARE VALVE, 1/2", 9-13PSI SPRING RANGE, NORMALLY CLOSED, 1.7CV
JOHNSON CONTROLS

FLARE VALVE, 1/2", 9-13PSI SPRING RANGE, NORMALLY CLOSED, 1.7CV

View Details
CONTROL VALVE, VG7000 SERIES, 1/2 GLOBE VALVE, BRASS TRIM, 1.8CV, SPRING 9-13PSIG, CLOSEOFF 191/348PSIG, 3-WAY MIX
JOHNSON CONTROLS

CONTROL VALVE, VG7000 SERIES, 1/2 GLOBE VALVE, BRASS TRIM, 1.8CV, SPRING 9-13PSIG, CLOSEOFF 191/348PSIG, 3-WAY MIX

View Details
DISCONTINUED BY MANUFACTURER, SOLENOID VALVE, 1210/120 VAC, 50/60 HZ
JOHNSON CONTROLS

DISCONTINUED BY MANUFACTURER, SOLENOID VALVE, 1210/120 VAC, 50/60 HZ

View Details
BALL VALVE, VMA1656 SERIES, 200 CLOSEOFF PSI, 1/2IN, 24 V, 1.2 CV
JOHNSON CONTROLS

BALL VALVE, VMA1656 SERIES, 200 CLOSEOFF PSI, 1/2IN, 24 V, 1.2 CV

View Details
SUCTION VALVE PLATE, SEAL
JOHNSON CONTROLS

SUCTION VALVE PLATE, SEAL

View Details
3 WAY VALVE, PRESSURE REGULATING, 30 IN MTG
JOHNSON CONTROLS

3 WAY VALVE, PRESSURE REGULATING, 30 IN MTG

View Details
DISCONTINUED BY MANUFACTURER, ELECTRIC VALVE ACTUATOR, 24 VAC, 50/60HZ, IP40
JOHNSON CONTROLS

DISCONTINUED BY MANUFACTURER, ELECTRIC VALVE ACTUATOR, 24 VAC, 50/60HZ, IP40

View Details
VALVE ACTUATOR, VA-7010 SERIES, 2 POSITION, NON-SPRING RETURN, 10 SECOND RUN TIME, 120 VAC
JOHNSON CONTROLS

VALVE ACTUATOR, VA-7010 SERIES, 2 POSITION, NON-SPRING RETURN, 10 SECOND RUN TIME, 120 VAC

View Details
CONTROL VALVE, 2-WAY, NO, 1/2" S.S. TRIM, BRONZE BODY, 4.6CV EQUAL PERCENTAGE FLOW
JOHNSON CONTROLS

CONTROL VALVE, 2-WAY, NO, 1/2" S.S. TRIM, BRONZE BODY, 4.6CV EQUAL PERCENTAGE FLOW

View Details
PNEUMATIC VALVE ACTUATOR, 3 TO 13 SPRING,1/2IN OD,N.O., FLARE,THREADED, 3-6# 1.0CV
JOHNSON CONTROLS

PNEUMATIC VALVE ACTUATOR, 3 TO 13 SPRING,1/2IN OD,N.O., FLARE,THREADED, 3-6# 1.0CV

View Details
VALVE REDUCING, PRECISION AIR, 1/4INCH REG, 200 INLET, 3-150 OUT
JOHNSON CONTROLS

VALVE REDUCING, PRECISION AIR, 1/4INCH REG, 200 INLET, 3-150 OUT

View Details
CONTROL VALVE,1" N.C. 11.6CV 9-13# VALVE ASSY
JOHNSON CONTROLS

CONTROL VALVE,1" N.C. 11.6CV 9-13# VALVE ASSY

View Details
2-1/2IN. NORM OPEN FLDG.IRON VALVE BODY ONLY. PDTC 2WAY NO ACTUATOR. 51CV
JOHNSON CONTROLS

2-1/2IN. NORM OPEN FLDG.IRON VALVE BODY ONLY. PDTC 2WAY NO ACTUATOR. 51CV

View Details
CONTROL VALVE,1/2" PDTC 1.8CV 0-10VDC NSR
JOHNSON CONTROLS

CONTROL VALVE,1/2" PDTC 1.8CV 0-10VDC NSR

View Details
ASSEMBLY CONTROL VALVE, 1/2 INCH UNION, N/O 3-6#, 73CV
JOHNSON CONTROLS

ASSEMBLY CONTROL VALVE, 1/2 INCH UNION, N/O 3-6#, 73CV

View Details
CONTROL VALVE,1.25" NC 9-13# W/POS 18.5CV
JOHNSON CONTROLS

CONTROL VALVE,1.25" NC 9-13# W/POS 18.5CV

View Details
SPRING KIT.3-6#5/16 INCH STK. FOR VT VALVE WITH V-3802 OR V-4000 ACT.
JOHNSON CONTROLS

SPRING KIT.3-6#5/16 INCH STK. FOR VT VALVE WITH V-3802 OR V-4000 ACT.

View Details
FLANGED CONTROL VALVE,4"N/O 4/8# VALVE ASSY 150CV
JOHNSON CONTROLS

FLANGED CONTROL VALVE,4"N/O 4/8# VALVE ASSY 150CV

View Details
CONTROL VALVE,1/2"UNIONGLOBE N/O 3-6#
JOHNSON CONTROLS

CONTROL VALVE,1/2"UNIONGLOBE N/O 3-6#

View Details
BALL VALVE,3/4" 2W 11.7CV SS TRIM
JOHNSON CONTROLS

BALL VALVE,3/4" 2W 11.7CV SS TRIM

View Details
GLOBE VALVE, MODEL VG7000, 3/4" NPT, BRONZE BODY, 3-WAY, MIXING, 15 PSI WSP, 125 PSI WOG, 7.3CV, CLOSEOFF 69/100 PSIG, BRASS TRIM, SPRING RETURN
JOHNSON CONTROLS

GLOBE VALVE, MODEL VG7000, 3/4" NPT, BRONZE BODY, 3-WAY, MIXING, 15 PSI WSP, 125 PSI WOG, 7.3CV, CLOSEOFF 69/100 PSIG, BRASS TRIM, SPRING RETURN

View Details
CONTROL VALVE, 4-WAY, SEATED CONEX, 16 BAR, 15 MM DN, BRASS, VZL 4
DANFOSS

CONTROL VALVE, 4-WAY, SEATED CONEX, 16 BAR, 15 MM DN, BRASS, VZL 4

View Details
EXPANSION VALVE, R134A, 3/8 N X 12MM, -40/+10C, -40/+50F, PS 34 BAR, MWP 500PSIG
DANFOSS

EXPANSION VALVE, R134A, 3/8 N X 12MM, -40/+10C, -40/+50F, PS 34 BAR, MWP 500PSIG

View Details
EXPANSION VALVE, 3/8IN X12MM, -40/+10 C, -40/+50 F, PS 34 BAR/MWP 500 PSIG, N5116B
DANFOSS

EXPANSION VALVE, 3/8IN X12MM, -40/+10 C, -40/+50 F, PS 34 BAR/MWP 500 PSIG, N5116B

View Details
About This Category

Industrial Valves at Z & F Corporation Ltd

Industrial Valves

Not every product under this heading is a process valve controlling flow in a pipeline — a good share of what we hold here are pneumatic directional control valves (spool and poppet valves) that route compressed air inside an automation circuit rather than liquid or gas through a process line. Both end up filed as "valves," but they're specified completely differently. Z & F Corporation Ltd supplies 584 genuine lines across both types, from 22 manufacturers.

The Two Main Groups

  • Process valves — ball, globe, and control valves, specified by body material, end connection, size, and Cv, used to control flow of a process fluid.
  • Pneumatic control valves — solenoid-piloted spool and poppet valves (3/2, 5/2 configurations), specified by port size, voltage, and base/manifold interface, used inside automation and actuation circuits.

If you're not sure which one you need, the giveaway is usually what's on the other side of it: a process valve sits in a pipe carrying the product itself; a pneumatic control valve sits in an air line feeding an actuator or cylinder somewhere else in the system. This range sits under the wider Valves & Controls category — see also Actuators & Positioners for what these valves are often paired with.

Who We Supply

Rotork and Flowserve lead on process valves and actuation; Norgren and Parker Hannifin lead on pneumatic control valves; Johnson Controls, Emerson (Aventics, Fisher), and Danfoss fill in more specific requirements across both groups. We are not affiliated with, or an authorised distributor of, any of these manufacturers — genuine stock only, sourced and supplied independently.

Matching a Pneumatic Control Valve

For spool and poppet valves specifically, the base/manifold interface (e.g. F base, ISO 5599) and voltage matter as much as the valve function itself — two valves with an identical 5/2 spec won't necessarily bolt onto the same manifold. Send us the base interface if you have it, or a photo of the valve on its manifold.

Orders ship worldwide with export documentation as standard — recent shipments have gone to process plants and automation OEMs across the GCC and South Asia. If you're replacing rather than specifying new, the nameplate details — series, port size, pilot voltage, and pressure rating — are usually enough for us to confirm the exact valve or a genuine direct equivalent, even where the original has been discontinued.

Need Industrial Valves Products?

Send us your part number, model number or specification and we will source genuine Industrial Valves products with full documentation and fast delivery.

Request a Quote

Frequently Asked Questions

A process valve sits directly in a pipe carrying the process fluid; a pneumatic control valve sits in an air line feeding an actuator elsewhere in the system. Describe where it's installed and we can confirm which type you need.