Industrial Valves

Product Category

Industrial Valves

613 Products Found

Independent Supplier Notice — Z & F Corporation Ltd is not affiliated with, authorized by, endorsed by, or acting as an official representative of any manufacturer, brand, or trademark owner referenced on this website. All product names, trademarks, brand names, logos, and manufacturer references are the property of their respective owners and are used solely for identification, reference, and compatibility purposes.

Genuine OEM Guaranteed
No grey-market or counterfeit stock
Fast & Reliable Delivery
24-48hr dispatch on available items
Complete Documentation
Certificates & calibration records
Full Catalogue

All Industrial Valves Products

Showing 24 of 613 products

DISCONTINUED BY MANUFACTURER, COIL FOR SOLENOID VALVE, 115V, 50HZ, 10W, TERMINAL BOX, IP67
DANFOSS

DISCONTINUED BY MANUFACTURER, COIL FOR SOLENOID VALVE, 115V, 50HZ, 10W, TERMINAL BOX, IP67

View Details
DISCONTINUED BY MANUFACTURER, ELECTRIC EXPANSION VALVE, FOR USE WITH HIGH PRESSURE REFRIGERANTS, AMIENT TEMPERATURE RANGE -58-120 F, INLET 3/8 INCH
DANFOSS

DISCONTINUED BY MANUFACTURER, ELECTRIC EXPANSION VALVE, FOR USE WITH HIGH PRESSURE REFRIGERANTS, AMIENT TEMPERATURE RANGE -58-120 F, INLET 3/8 INCH

View Details
DISCONTINUED BY MANUFACTURER, SOLENOID VALVE COIL
DANFOSS

DISCONTINUED BY MANUFACTURER, SOLENOID VALVE COIL

View Details
SOLENOID VALVE, 220/230VAC, 50HZ, 10W, 16X16MM ODF
DANFOSS

SOLENOID VALVE, 220/230VAC, 50HZ, 10W, 16X16MM ODF

View Details
DISCONTINUED BY MANUFACTURER, UNLOADING VALVE, CAPACITY REGULATOR, STEM LENGTH: 2.25 INCH, PRESSURE RATING: 35 BAR / 500 PSI, 2 X MOUNTING PORTS
DANFOSS

DISCONTINUED BY MANUFACTURER, UNLOADING VALVE, CAPACITY REGULATOR, STEM LENGTH: 2.25 INCH, PRESSURE RATING: 35 BAR / 500 PSI, 2 X MOUNTING PORTS

View Details
EXPANSION VALVE, ETS6-25, STAINLESS STEEL BODY, COPPER CONNECTIONS
DANFOSS

EXPANSION VALVE, ETS6-25, STAINLESS STEEL BODY, COPPER CONNECTIONS

View Details
PROPORTIONAL VALVE SEAL KIT, 5 RUBBER SEALS, 2 NUTS
DANFOSS

PROPORTIONAL VALVE SEAL KIT, 5 RUBBER SEALS, 2 NUTS

View Details
DISCONTINUED BY MANUFACTURER, VALVE BLOCK
DANFOSS

DISCONTINUED BY MANUFACTURER, VALVE BLOCK

View Details
Siemens 6 DR Pneumatic Valve
SIEMENS

Siemens 6 DR Pneumatic Valve

View Details
Norgren Pneufit D Check Valve Tube Tube
NORGREN

Norgren Pneufit D Check Valve Tube Tube

View Details
Norgren Plunger Pneumatic Manual Control Valve SUPER X Series, G G 1/8, III B
NORGREN

Norgren Plunger Pneumatic Manual Control Valve SUPER X Series, G G 1/8, III B

View Details
Norgren Plunger Pneumatic Manual Control Valve X30 Series, G G 1/8, X3044002
NORGREN

Norgren Plunger Pneumatic Manual Control Valve X30 Series, G G 1/8, X3044002

View Details
Norgren Plunger Mechanical Valve 306 Series, G G 1/4, III B
NORGREN

Norgren Plunger Mechanical Valve 306 Series, G G 1/4, III B

View Details
Norgren Plunger Mechanical Valve Martonair Series, III B
NORGREN

Norgren Plunger Mechanical Valve Martonair Series, III B

View Details
Norgren Plunger Pneumatic Manual Control Valve S666 Series, G G 1/8, III B
NORGREN

Norgren Plunger Pneumatic Manual Control Valve S666 Series, G G 1/8, III B

View Details
Norgren Pedal Pneumatic Manual Control Valve 03 Series, G G 1/4, 3068102
NORGREN

Norgren Pedal Pneumatic Manual Control Valve 03 Series, G G 1/4, 3068102

View Details
Norgren Pedal Pneumatic Manual Control Valve 03 Series, G G 1/8, III B
NORGREN

Norgren Pedal Pneumatic Manual Control Valve 03 Series, G G 1/8, III B

View Details
Norgren Pedal Pneumatic Manual Control Valve SUPER X Series, BSPP G 1/8, III B
NORGREN

Norgren Pedal Pneumatic Manual Control Valve SUPER X Series, BSPP G 1/8, III B

View Details
Norgren Pedal Pneumatic Manual Control Valve X30 Series, G G 1/8, III B
NORGREN

Norgren Pedal Pneumatic Manual Control Valve X30 Series, G G 1/8, III B

View Details
Norgren Pedal Pneumatic Manual Control Valve X30 Series, G G 1/8, X3048202
NORGREN

Norgren Pedal Pneumatic Manual Control Valve X30 Series, G G 1/8, X3048202

View Details
Norgren Pedal Mechanical Valve X306 Series, G G 1/4, III B
NORGREN

Norgren Pedal Mechanical Valve X306 Series, G G 1/4, III B

View Details
Norgren Nickel Plated, Brass Threaded, Process Ball Valve
NORGREN

Norgren Nickel Plated, Brass Threaded, Process Ball Valve

View Details
Norgren Nickel Plated Brass Threaded Reduced Bore, 2-Way, ISO 228/1 10 bar, Ball Valve
NORGREN

Norgren Nickel Plated Brass Threaded Reduced Bore, 2-Way, ISO 228/1 10 bar, Ball Valve

View Details
Norgren Nickel Plated Brass Threaded 2-Way, ISO 7.1 40 bar, Ball Valve
NORGREN

Norgren Nickel Plated Brass Threaded 2-Way, ISO 7.1 40 bar, Ball Valve

View Details
About This Category

Industrial Valves at Z & F Corporation Ltd

Industrial Valves

Not every product under this heading is a process valve controlling flow in a pipeline — a good share of what we hold here are pneumatic directional control valves (spool and poppet valves) that route compressed air inside an automation circuit rather than liquid or gas through a process line. Both end up filed as "valves," but they're specified completely differently. Z & F Corporation Ltd supplies 584 genuine lines across both types, from 22 manufacturers.

The Two Main Groups

  • Process valves — ball, globe, and control valves, specified by body material, end connection, size, and Cv, used to control flow of a process fluid.
  • Pneumatic control valves — solenoid-piloted spool and poppet valves (3/2, 5/2 configurations), specified by port size, voltage, and base/manifold interface, used inside automation and actuation circuits.

If you're not sure which one you need, the giveaway is usually what's on the other side of it: a process valve sits in a pipe carrying the product itself; a pneumatic control valve sits in an air line feeding an actuator or cylinder somewhere else in the system. This range sits under the wider Valves & Controls category — see also Actuators & Positioners for what these valves are often paired with.

Who We Supply

Rotork and Flowserve lead on process valves and actuation; Norgren and Parker Hannifin lead on pneumatic control valves; Johnson Controls, Emerson (Aventics, Fisher), and Danfoss fill in more specific requirements across both groups. We are not affiliated with, or an authorised distributor of, any of these manufacturers — genuine stock only, sourced and supplied independently.

Matching a Pneumatic Control Valve

For spool and poppet valves specifically, the base/manifold interface (e.g. F base, ISO 5599) and voltage matter as much as the valve function itself — two valves with an identical 5/2 spec won't necessarily bolt onto the same manifold. Send us the base interface if you have it, or a photo of the valve on its manifold.

Orders ship worldwide with export documentation as standard — recent shipments have gone to process plants and automation OEMs across the GCC and South Asia. If you're replacing rather than specifying new, the nameplate details — series, port size, pilot voltage, and pressure rating — are usually enough for us to confirm the exact valve or a genuine direct equivalent, even where the original has been discontinued.

Need Industrial Valves Products?

Send us your part number, model number or specification and we will source genuine Industrial Valves products with full documentation and fast delivery.

Request a Quote

Frequently Asked Questions

A process valve sits directly in a pipe carrying the process fluid; a pneumatic control valve sits in an air line feeding an actuator elsewhere in the system. Describe where it's installed and we can confirm which type you need.